Molded Pulp Protection for Glass Sheets, Mirrors and Flat Panels: Edge and Corner Cushioning for Fragile Flats

Flat glass, mirrors, and display panels fail at edges and corners long before the center; generic foam or bubble wrap leaves the perimeter exposed. Molded pulp edge blocks, corner cradles, and full-perimeter frames localize protection exactly where flat fragile products need it most.

The Scenario: Three challenges in flat-glass protection

Flat-glass protection faces three challenges:

Pain Points

• Edges and corners concentrate stress during drop and stacking, so they need the most cushioning;
• Flat panels are heavy, so protection must add stiffness without excessive bulk;
• Glass scratches and glass-paper contact must stay clean to avoid surface marks.

The Solution: Three molded-pulp flat-glass solutions

Molded pulp offers three solutions for flat glass:

1. Edge blocks and corner cradles Molded edge blocks and corner cradles wrap the vulnerable perimeter, absorbing impact before it reaches the glass.

2. Full-perimeter frames Rigid pulp frames brace the panel and add stacking stiffness so flat products don't flex in transit.

3. Clean, scratch-free contact Smooth contact surfaces keep glass and mirror faces mark-free during shipment.

The Result: Fewer breakages, less bulk

With these solutions, breakage at edges and corners falls and packaging bulk shrinks. Molded pulp is recyclable, replacing EPS and bubble wrap for a cleaner, lighter flat-glass pack.